Skip to content Skip to sidebar Skip to footer

At Kartal Auto, we pride ourselves on offering expert services to enhance and protect luxury vehicles. Recently, we completed a car wrapping job on the stunning Bentley EXP 10 Speed in Dubai, transforming its appearance with a custom vinyl wrap. While the wrapping process was carefully planned, we identified several issues during installation that required our expert attention. Here’s a breakdown of the challenges we encountered and the solutions we implemented to ensure the vehicle not only looked incredible but was also protected for the long term.

Issues Identified During the Wrapping Process

Air Bubbles and Wrinkling

  • As we applied the wrap, we discovered some air bubbles and wrinkles forming in certain areas, especially on complex curves and edges. This is a common challenge when applying vinyl wraps, as air can get trapped beneath the film if the application isn’t smooth or if the surface isn’t prepped properly.

Solution: To resolve this, we carefully removed the affected sections of the wrap and re-applied them with heat guns and squeegees to smooth out any wrinkles or bubbles. Our team used advanced application techniques to ensure a smooth, flawless finish. By applying gentle heat, we ensured the vinyl adhered tightly to the surface, leaving no imperfections or air pockets.

Inconsistent Color and Finish

  • During the inspection, we noticed slight inconsistencies in the color and finish of the wrap, particularly around the edges and seams. This can sometimes happen when different batches of vinyl are used or if the wrap is not applied uniformly.

Solution: We carefully re-checked the entire wrap and replaced any areas where the color or finish did not meet our high standards. Our team used high-quality, premium vinyl from trusted suppliers to ensure the color was consistent across the entire vehicle. With attention to detail, we ensured the wrap’s finish was uniform, creating a visually striking, consistent appearance from every angle.

Misalignment Around Complex Areas

  • Some of the more complex areas, such as the bumpers, side mirrors, and door handles, had slight misalignment in the wrap, which can occur when working around intricate shapes or tight spaces.

Solution: To fix this, we carefully repositioned the wrap and used custom trimming techniques to ensure precise alignment around all complex areas. Our expert team ensured that the wrap flowed seamlessly around every curve and contour, paying special attention to tight spots like door edges and curves around the wheel wells. This ensured that the wrap looked cohesive and clean across the entire vehicle.

Edge Lifting and Poor Adhesion

  • We discovered some areas where the edges of the vinyl were beginning to lift, especially around the doors and fenders. This could have compromised the longevity of the wrap and led to peeling over time.

Solution: We re-secured the lifting edges by using high-quality adhesive primers and applying more pressure around the edges for a stronger bond. After trimming and aligning the wrap, we applied a protective edge-sealing technique to ensure the vinyl adhered securely and did not lift or peel. This extra step ensured that the wrap would last longer and remain flawless over time.

Inadequate Surface Preparation

  • One of the key challenges we faced was an issue with the surface preparation. In certain areas, residual contaminants from the factory finish or previous work were present, which can affect how the vinyl adheres to the surface.

Solution: To fix this, we thoroughly cleaned and prepared the entire surface of the Bentley EXP 10 Speed. We used specialized cleaning agents and adhesion promoters to ensure that the vinyl would bond perfectly. Our team ensured the surface was completely free of any dust, oils, or contaminants, which created an ideal foundation for the vinyl wrap.

Bentley EXP 10 Speed Full Car Wraps (Color Change or Design)

Bentley EXP 10 Speed Partial Car Wraps (Roof, Hood, Mirrors, etc.)

Bentley EXP 10 Speed Custom Graphics and Designs

Bentley EXP 10 Speed Matte, Gloss, Satin, or Metallic Finishes

Bentley EXP 10 Speed Textured Wraps (Carbon Fiber, Brushed Metal, etc.)

Bentley EXP 10 Speed Commercial Vehicle Wraps (Advertising and Branding)

Bentley EXP 10 Speed Paint Protection Film (PPF) Over Wraps

Bentley EXP 10 Speed Vinyl Sticker and Decal Application

Bentley EXP 10 Speed Custom Vinyl Wrap for Fleet Vehicles

Bentley EXP 10 Speed Wrap Removal and Surface Restoration

Bentley EXP 10 Speed Protective Coatings for Wrapped Vehicles

Bentley EXP 10 Speed Headlight and Taillight Tinting with Wraps

Bentley EXP 10 Speed Specialty Wraps for Motorcycles or Boats

Call Us Now