At Kartal Auto, we are proud to offer the highest level of service to luxury car owners, providing custom solutions that enhance both the appearance and protection of high-end vehicles. Recently, we had the privilege of completing a Paint Protection Film (PPF) installation on the exquisite Bentley EXP 100 GT in Dubai. As part of our meticulous service, we encountered a few issues during the process that required our expert attention. Here’s an overview of the challenges we faced and the solutions we implemented to ensure that the Bentley EXP 100 GT received the best possible protection and aesthetic enhancement.
Issues Identified During the PPF Installation
Wrinkles and Air Pockets During Application
- As we began applying the PPF on the Bentley EXP 100 GT, we encountered some areas where wrinkles and air pockets developed, particularly around the vehicle’s curved surfaces and intricate body lines. This can often occur when the film isn’t properly applied on complex contours, or when dust or contaminants interfere with the adhesion process.
Solution: To address this, we carefully removed the affected sections and re-applied the film using specialized heat and pressure techniques. By applying the PPF film with precision and gently heating it, we allowed the material to conform seamlessly to the vehicle’s curves, ensuring a smooth and bubble-free finish. This method provided an impeccable result that adhered tightly to the contours, leaving no wrinkles or air pockets behind.
Discoloration and Uneven Gloss
- After the installation, we observed slight discoloration and uneven gloss in some areas, likely due to inconsistencies in the material or environmental factors during installation. The Bentley EXP 100 GT’s luxurious finish deserves a consistent, high-gloss sheen to complement its sophisticated design.
Solution: We removed the affected sections of PPF and re-applied them using premium-grade, high-gloss PPF material. This ensured a consistent and uniform finish across the entire vehicle. Our team also employed polishing techniques to ensure the PPF not only provided optimal protection but also maintained the car’s sleek, glossy appearance, preserving its luxury status.
Improper Edge Sealing
- In some areas, the edges of the PPF did not adhere securely, leaving room for potential peeling or lifting over time. This issue can occur if the edges aren’t properly sealed or if the vehicle’s surface is not prepped meticulously.
Solution: To prevent any future peeling or lifting, we carefully re-sealed all the edges using high-quality adhesive and ensured that the PPF film was trimmed to perfection. By using precise edge-cutting tools, we achieved a clean, seamless finish that tightly bonded to the vehicle’s body, preventing any lifting or wear at the edges. This solution ensured that the PPF would stay intact for years to come.
Incorrect Coverage of Key Areas
- Initially, some of the key areas, such as the front bumper, hood, and side mirrors, were not fully covered by the PPF, which left parts of the car vulnerable to scratches and stone chips. These areas are highly exposed to wear and tear, especially in a city like Dubai with high traffic and road conditions.
Solution: We revisited these critical areas and applied additional PPF layers to ensure full coverage. By customizing the application to fit the vehicle’s high-impact zones, we offered better protection against road debris, scratches, and minor abrasions. This enhanced the overall durability and protection of the vehicle, ensuring that all exposed areas were safeguarded.
PPF Application on Delicate Surfaces
- The Bentley EXP 100 GT features delicate surfaces, such as chrome accents and custom trim, which required extra care during the PPF application. Applying the film too aggressively could have damaged or altered the appearance of these elements.
Solution: For these sensitive areas, we used specialized PPF material designed for delicate surfaces. We also employed a gentler application technique to ensure the film adhered smoothly without affecting the chrome or trim. This process allowed us to provide full protection without compromising the car’s sophisticated details, ensuring that the entire vehicle maintained its pristine appearance.
Bentley EXP 100 GT PPF Installation for Full Vehicle Protection
Bentley EXP 100 GT Partial PPF Coverage (e.g., hood, fenders, mirrors)
Bentley EXP 100 GT Custom PPF Design and Application
Bentley EXP 100 GT Self-Healing PPF Installation
Bentley EXP 100 GT PPF for High Impact Areas (bumper, side skirts)
Bentley EXP 100 GT PPF Removal and Replacement
Bentley EXP 100 GT Ceramic Coating Over PPF for Enhanced Protection
Bentley EXP 100 GT PPF for Headlights and Taillights
Bentley EXP 100 GT Clear Bra PPF for Cars
Bentley EXP 100 GT Paint Touch-Up After PPF Application
Bentley EXP 100 GT PPF Maintenance and Cleaning
Bentley EXP 100 GT Scratch and Chip Protection with PPF
Bentley EXP 100 GT Matte or Gloss PPF Finishes