At Kartal Auto, we take pride in delivering exceptional automotive services for luxury and classic vehicles. Our recent Paint Protection Film (PPF) job on the Rolls-Royce 10 HP was a meticulous process, as we worked to preserve and enhance the vehicle’s iconic look while protecting it from external elements. During the PPF application, we encountered several issues that required attention. Here’s a breakdown of the problems we found and the solutions we implemented to ensure the Rolls-Royce 10 HP received the best care possible:
Issue Found:
1. Existing Paint Imperfections and Surface Scratches
Issue: Upon inspecting the Rolls-Royce 10 HP, we noticed several surface scratches, swirl marks, and other imperfections in the paint that were caused by previous wear and tear. These minor flaws, although not immediately noticeable, would become more visible once the PPF was applied, compromising the smooth, glossy finish.
Solution: Our expert technicians performed a thorough paint correction process before applying the PPF. This involved polishing the surface to remove imperfections and restore a smooth, flawless finish. By eliminating the scratches and swirls, we ensured that the PPF would adhere perfectly and provide a mirror-like shine to the vehicle’s surface.
2. Dirt and Contaminants on the Paint Surface
Issue: The Rolls-Royce 10 HP had accumulated dust, oils, and contaminants on its paint, which could potentially cause imperfections when the PPF was applied. Any dirt or debris left on the surface would result in imperfections or air pockets under the film, reducing the effectiveness and aesthetic quality of the PPF.
Solution: Prior to applying the PPF, we conducted a meticulous cleaning and decontamination process. Using advanced techniques like clay bar treatment, we removed any dirt, oils, and environmental contaminants, ensuring the paint was in perfect condition for the film to bond smoothly and seamlessly. This ensured a flawless finish with no air bubbles or imperfections beneath the film.
3. UV Damage and Paint Fading
Issue: The Rolls-Royce 10 HP, being a vintage model, had signs of fading and UV damage on the paint. Over time, sun exposure can cause the paint to lose its luster and vibrancy, leaving it vulnerable to further damage.
Solution: To protect the car’s paint from further UV degradation, we applied a high-quality PPF with built-in UV protection. This advanced film helps shield the vehicle from harmful UV rays, preventing the paint from fading and maintaining the car’s brilliant finish for years to come. The PPF also adds a layer of self-healing protection, which allows minor scratches to disappear over time, ensuring the car looks pristine.
4. Areas with Vulnerability to Stone Chips and Road Debris
Issue: The front end of the Rolls-Royce 10 HP, particularly the hood, bumper, and side mirrors, showed signs of wear due to stone chips and road debris. These areas are highly susceptible to damage from rocks, gravel, and other debris, especially when driving at higher speeds.
Solution: We focused our PPF application on the high-impact areas, including the front bumper, hood, side mirrors, and fenders. Using precision-cut PPF, we ensured that these critical areas received maximum protection against stone chips, scratches, and other road hazards. The PPF will act as a shield, absorbing the impact of debris and preventing damage to the vehicle’s paint.
5. Edges and Corners Not Fully Protected
Issue: Some of the previous PPF installations on the Rolls-Royce 10 HP had not fully covered the edges and corners of the body panels. This left certain areas vulnerable to peeling and wear, reducing the effectiveness of the protection.
Solution: Our team ensured that the new PPF was expertly applied, extending to the edges and corners of every panel. We used cutting-edge technology to achieve a precise, seamless application, ensuring that the film not only covered all visible areas but also wrapped around edges and corners, providing full coverage and long-lasting protection.
Rolls Royce 10 HP Full-Body PPF Application
Rolls Royce 10 HP Partial PPF Application (Hood, Bumper, Fenders)
Rolls Royce 10 HP Front-End Protection PPF
Rolls Royce 10 HP Door Edge and Handle Protection PPF
Rolls Royce 10 HP Mirror Cap Protection PPF
Rolls Royce 10 HP Roof and Pillar Protection PPF
Rolls Royce 10 HP Custom Cut and Pre-Cut PPF Installation
Rolls Royce 10 HP Matte or Gloss PPF Options
Rolls Royce 10 HP PPF Removal and Replacement
Rolls Royce 10 HP Self-Healing and Anti-Yellowing PPF Installation